From: Lodge, AB (Tony) [A.B.Lodge@rl.ac.uk] Sent: 10 August 2006 11:01 To: Werner Lustermann (E-mail); Lubomir Djambazov (E-mail) Cc: Greenhalgh, RJS (Justin); Davec (E-mail) Hi All, this is a list of the materials used to wire a Super Crystal Umbilical: RS Components Ltd (UK). Web Address http://rswww.com/cgi-bin/bv/rswww/home.do?returningUser=Y&cacheID=ukie 1/ Cable Ties Rad. Hard and Halogen Free ( Material UL Classification 94V-0). Yes ? Part Number 212-8065. 2/ Tinned Copper Braid 4mm Dia. Part Number 244-5168. 3/ Tinned Copper Solder Tags 3.5mm Part Number 186-7854. 4/ Heat Shrink Red 3:1 Ratio, 3mm * 10M (Think this is Rad Hard ?) Part Number 252-8055. 5/ Heat Shrink Yellow 3:1 Ratio, 3mm * 10M (Think this is Rad. Hard ?) Part Number 252-7939. Farnell Components Ltd (UK). Web Address http://uk.farnell.com/jsp/home/homepage.jsp 6/ Umbilical 1mm cable crimp pins Part Number 105-354. Crimp Tool used was Daniel MFG. Corp. DMC. AF8 Crimping Tool M22520/1-01. I think this tool is in the CERN Store? 7/ Mother Board 1mm. Sockets Part Number 150-501. CERN Stores EDH Web Address https://aislogin.cern.ch/login-servlet/Login?REFER=https://edh.cern.ch/Desktop 8/ Umbilical Signal Coaxial Cable CERN Stores (Think this is Rad. Hard ?) Part Number: 04.61.11.105.3 9/ Coaxial Cable CERN Stores (Think this is Rad. Hard ?) Part Number: 04.61.11.145.5 This cable has been used for the following items: a/ Braid used to make the Ground connections from the HV Filter Cards to the SC Mechanical Housings (you could use alternative if you require). b/ Inner signal Cable (2KV rated) used to make common connections of Anode & Dynode HV Supply between HV Cards (you could use alternative if you require). Cable markers were from RS Components Ltd (UK). Web Address http://rswww.com/cgi-bin/bv/rswww/home.do?returningUser=Y&cacheID=ukie Part Number 364-6700. These are not Rad. Hard so better solution could easily be found? Hope this list will help you in the future please feel free to phone or email with any question. Kind Regards Tony.