From: Wolfgang Funk
Sent: 01 July 2008 16:45
To: francesca.cavallari@roma1.infn.it
Cc: Ken Bell; Dave Cockerill
Subject: Re: EE HV channel subdivision

Attachments: HV to REDEL.eps; Receiving HV_Connector_1.1.pdf; Receiving
HV_Connector_1.2.pdf; Receiving HV_Connector_1.3.pdf; Receiving
HV_Connector_2.1.pdf; Receiving HV_Connector_2.2.pdf; Receiving
HV_Connector_3.1.pdf; Receiving HV_Connector_4.1.pdf; Receiving
HV_Connector_4.2.pdf; Receiving HV_Connector_6.1.pdf; Receiving
HV_Connector_7.1.pdf; Receiving HV_Connector_7.2.pdf; Receiving
HV_Connector_8.1.pdf; Receiving HV_Connector_8.2.pdf;
ee-hv-fabrication.xls; ee2-hv-fabrication.xls; ee-lv-fabrication.xls

Dear Francesca,

attached the file for LV (indicating which LV cable goes to which channel at the Maraton-channel, 
still needed which cable powers up which SCs) 

and for HV (indicating which cable goes to which Dee ppanel connector (2 runs of cables),
and which wire inside the cable goes to which Xtal) 

What is still missing is the scheme which wire set in each cable goes to which CAEN channel, 
at least for the start-up, although active regrouping of channels with similar behavior together is foreseen.

Ken, can you help there?

the missing info for LV, I should receive soon. In addition, Dave Cockerill will put soon all those infos on
the web Cheers, W.


Francesca Cavallari wrote:
> Dear Ken and Wolfgang,
> I need to know the HV and LV channel subdivision of the endcaps.
> In other words, supercrystal by supercrystal  the HV and LV channel
> number they belong to.
> Do you have a sketch?
> Thanks,
> Francesca
>