From: Hill, JA (John) [J.A.Hill@rl.ac.uk]
Sent: 15 May 2008 10:05
To: Dave Cockerill; Ken Bell
Cc: Wolfgang Funk; Gerard Faber
Subject: FW: EE Protection panels

Attachments: envelope_1029-150.pdf; td-1138-183.jpg

FYI, I have deleted the CAD transfer files for you as they are to large...



--------------------------------------------------------------------------------
From: Hill, JA (John) 
Sent: 15 May 2008 09:00
To: 'Jean Bos'
Subject: EE Protection panels


Bonjour Jean,
I have attached a number of files to this mail, the main ones are the the CAD exchange files that hopefully
you will be able to read on you CAD package.

Hopefully you will be able to open the panel assembly files, I have attached a jpg to show what you should see.
The panels should be mounted onto our End Cap Support Rings, I have attached a pdf to indicate where the
rear fixing should be made in Z (3907.5). The front fixtures should just 'hover' above the front of the ring, this
is designed so as the front of the ring is circular and we have a flat plate on the bracket, this will be screwed 
down on assembly. The panels are mounted concentric to the assembly axis/beam line.
Please let me know if you have successfully imported the files otherwise we will try some other method to transfer!

Best Regards
John



John A Hill IEng MIED 
Project Engineer, Mechanical Design

Science and Technology Facilities Council
Rutherford Appleton Laboratory
Chilton, Didcot, Oxon OX11 0QX


--------------------------------------------------------------------------------

T+44 (0)1235 446611
F+44 (0)1235 446863 

J.A.Hill@rl.ac.uk

http://www.stfc.ac.uk