From: Wolfgang Funk [Wolfgang.Funk@cern.ch]
Sent: 20 January 2004 19:21
To: a.lodge@rl.ac.uk; john.hill@rl.ac.uk; k.bell@rl.ac.uk;
Lucie.Linssen@cern.ch; R.M.Brown@rl.ac.uk; J.Greenhalgh@rl.ac.uk;
D.J.A.Cockerill@rl.ac.uk
Subject: EE fiber scheme

Dear Tony,
I will try to explain you the present EE fiber architecture:
We will have the distributed patch panel (transfer from pigtails to 
ruggedized fiber including the furcation element) inside boxes with the 
size 140/170 X 220 X 20, as you know! From there we need 3 different 
lengths of ruggedized fibers (3 circles of box positions inside the 
Dee). The fibers are ending each time at a 4-way Diamond MF-B1 
connector. In the patch panel the MF-B2 and MF-B3 are installed. Towards 
the outside we start from there with 4 MF-A2 connectors and their 4 
ruggedized ribbons running 21m (minimum) to 35m (maximum) through the 
ducts towards the beginning of the cable chain to a transfer box 
(ruggedized ribbon to Ericson cable).
For the Diamond stuff MF-B1-3, MF-A2 see: 
http://www.diamond-fo.com/products/datasheets/MFS_e.pdf
http://www.diamond-fo.com/frameset.asp?content=http://www.diamond.ch/users/common/dhome.htm?origin=www.diamond.ch 

We ordered samples of the stuff needed at the patch panel to verify our 
design. It should arrive soon at CERN.

See you soon in GVA, cheers, Wolfgang