To access the system
|
|
Log in on the flat screen as user l1calo_daq |
|
Type ssh pctb-lv1c-ros01 to
connect to the ROS PC; |
|
Starting a run
|
|
Type play_daq $TDAQ_PARTITION |
Starts the online system. Wait for the Graphical interface to start. The window has tabbed
panes on the right, and the main window on the left. |
MRS tab, select
ALL under subscription settings |
Subscribes for all system messages. The message window can
be cleared at any time using the Commands menu in the Gui. |
On the main window, press the BOOT button.
|
Starts all online programs |
L1Calo Tab, set Run Type to
Testbeam_CPM Playback |
The run type depends on what is needed. The Help icon (like
a red cross symbol) provides information on the options available. |
GENPARS tab: |
|
set Generator to
LvdsCpmHit |
In a simulation run, specifies the type of test vectors to
generate. See the help files (red-cross icon) for a list of the generators
available. |
set Ticks between L1As to
20000 |
In a simulation run, sets frequency of L1As generated. A
large value avoids busy problems if the busy network is not cabled. |
MODPARS tab |
|
ensure required modules are enabled |
Defaults to the set used in the previous run. DSS1 must be
enabled to generate L1As for simulation. |
On the main window, press LOAD
|
|
On the main window, press CONFIGURE
|
When this transition completes, all links should be up but
there should be no DAVs. |
On the main window, press START |
The system should now be taking data. |