SCT Barrel Thermal Enclosure PRR
Review on Thursday 30 October 2003
Documents
Thermal Enclosure Design
-
ATL-IS-ER-0045
SCT Thermal Enclosures
- Stephen Haywood et al (15/4/03)
(EDMS)
General requirments appropriate to the Barrel and End-cap.
Finished for time being.
-
ATL-IS-ER-0044
SCT Barrel Thermal Enclosures
- Peter Ford et al (24/4/03)
(EDMS)
Design of Barrel TE.
Very much work in progress - lots to do.
-
ATL-IS-ER-0046
SCT Thermal Enclosure Heaters
- Tony Jones (15/4/03)
(EDMS)
Design details of Heater Pads.
Finished. Document used for obtaining quotes.
Reference Documents
-
ATL-IC-EN-0009
Inner detector Thermal Management and Environmental Gas
- Richard Hawkings et al (xx/4/03)
(EDMS)
Overview of all Cooling and Environmental issues inside the ID, including operating scenarios.
About to undergo a revision.
-
Thermal and Environmental Management for the ATLAS Inner Tracker
- Derek Cragg (10/8/00)
(Word)
Overview of all Cooling and Environmental issues, including first design ideas and consideration
of temperature profiles in heat spreaders.
The original work, largely replaced by ATL-IC-EN-0009.
-
ATL-IC-EP-0007
Requirements for Power Supply System of the ATLAS Inner Detector Heaters
- Marco Olcese et al (4/2/03)
(EDMS)
Includes considerations of power requirements of Thermal Enclosures.
Finished for time being.
-
ATL-IS-EN-0015
Moisture Management in the SCT
- Fred Hartjes (7/3/03)
(EDMS)
For discussion.
-
Testing of Barrel Thermal Enclosure Bulkhead Power
Tape Grommets and Proposed Sealant
- Brian Anderson (25/2/03)
(Word)
Gas tightness of Bulkhead.
In progress.
Drawings
The drawings are stored as HPGL, and hence require an HPGL viewer to visualise.
Currently they can be found on the
RAL ftp site
Back to RAL SCT EC Engineering
Last updated: 24 October 03
Stephen Haywood S.Haywood@rl.ac.uk