ID Cooling FDR - SCT Thermal Enclosures
Review on Tuesday 13 May 2003
Agenda and
Talks
Stephen's talk (Word).
Documents
Thermal Enclosure Design
-
ATL-IS-ER-0045
SCT Thermal Enclosures
- Stephen Haywood et al (15/4/03)
(EDMS)
General requirments appropriate to the Barrel and End-cap.
Finished for time being.
-
ATL-IS-ER-0044
SCT Barrel Thermal Enclosures
- Peter Ford et al (24/4/03)
(EDMS)
Design of Barrel TE.
Very much work in progress - lots to do.
-
ATL-IS-ER-0018
SCT End-Cap Thermal Enclosures
- Jason Tarrant (17/4/03)
(EDMS)
Design of End-cap TE.
Fairly complete. Most of the work for this was done for End-cap FDR (Nov 2001).
Need to update Cooling and Heating.
-
ATL-IS-ER-0046
SCT Thermal Enclosure Heaters
- Tony Jones (15/4/03)
(EDMS)
Design details of Heater Pads.
Finished. Document used for obtaining quotes.
Reference Documents
-
ATL-IC-EN-0009
Inner detector Thermal Management and Environmental Gas
- Richard Hawkings et al (xx/4/03)
(EDMS)
Overview of all Cooling and Environmental issues inside the ID, including operating scenarios.
About to undergo a revision.
-
Thermal and Environmental Management for the ATLAS Inner Tracker
- Derek Cragg (10/8/00)
(Word)
Overview of all Cooling and Environmental issues, including first design ideas and consideration
of temperature profiles in heat spreaders.
The original work, largely replaced by ATL-IC-EN-0009.
-
ATL-IS-EN-0014
End-cap Grounding and Shielding
- Debbie Greenfield, Tim Jones (14/4/03)
(EDMS)
The result of discussions and meetings with Ned Spencer.
Finished for time being.
-
ATL-IC-EP-0007
Requirements for Power Supply System of the ATLAS Inner Detector Heaters
- Marco Olcese et al (4/2/03)
(EDMS)
Includes considerations of power requirements of Thermal Enclosures.
Finished for time being.
-
ATL-IS-EN-0015
Moisture Management in the SCT
- Fred Hartjes (7/3/03)
(EDMS)
For discussion.
Other Relevent Documents
-
ATL-IS-ER-0020
Simulations of Convection Cooling
- Ron Fowler (8/10/01)
(EDMS)
Heat flow and temperatures in volume between two Discs.
Finished.
-
ATL-IS-TR-0010
Measurement of Convection between the Discs
- Ian Duerdoth et al (23/8/01)
(EDMS)
Physical mock-up to examine heat flow and temperatures in volume
between two Discs at Manchester.
Finished.
-
Testing of Barrel Thermal Enclosure Bulkhead Power
Tape Grommets and Proposed Sealant
- Brian Anderson (25/2/03)
(Word)
Gas tightness of Bulkhead.
In progress.
Drawings
The drawings are stored as HPGL, and hence require an HPGL viewer to visualise.
Inner Detector
-
TB-0049-177
Inner Detector Geometry Layout (version R)
- Andy Nichols (2/4/03)
(hpgl)
Barrel Thermal Enclosure
These drawings are WORK IN PROGRESS and should not be considered to be definitive.
-
TB-0049-305
PPB1
- Andy Nichols (2/4/03)
(hpgl)
-
TD-1020-101
Side Panel - End Fixing Bracket
- Tony Jones (8/4/03)
(hpgl)
-
TD-1020-120#1
OTE Assembly
- Tony Jones (8/4/03)
(hpgl)
-
TD-1020-120#2
OTE Assembly
- Tony Jones (8/4/03)
(hpgl)
-
TD-1020-120#3
OTE Assembly
- Tony Jones (8/4/03)
(hpgl)
-
TD-1020-164#1
Thermal Enclosure Assembly
- Tony Jones (9/4/03)
(hpgl)
-
TD-1020-164#2
Thermal Enclosure Assembly
- Tony Jones (9/4/03)
(hpgl)
-
TD-1020-203
Cooling Circuits
- Peter Ford (9/4/03)
(hpgl)
-
TD-1020-246
Outer Rail Plug
- Tony Jones (8/4/03)
(hpgl)
-
TD-1020-248
Outer Rail Plug
- Tony Jones (8/4/03)
(hpgl)
-
TD-1020-249
Outer Rail Plug
- Tony Jones (8/4/03)
(hpgl)
-
TD-1020-250
Outer Rail Plug
- Tony Jones (8/4/03)
(hpgl)
-
TD-1020-400#1
Side Panel Assembly
- Tony Jones (8/4/03)
(hpgl)
-
TD-1020-400#2
Side Panel Assembly
- Tony Jones (8/4/03)
(hpgl)
-
TD-1034-120#1
OTE CF Panel Assembly
- Tony Jones (9/4/03)
(hpgl)
-
TD-1034-120#2
OTE CF Panel Assembly
- Tony Jones (9/4/03)
(hpgl)
-
TD-1034-122
Panel Skin
- Tony Jones (8/4/03)
(hpgl)
-
TD-1034-170
Barrel Sector Prototype Assembly
- Tony Jones (9/4/03)
(hpgl)
-
TD-1034-213
Outer CF Rail Assembly
- Tony Jones (8/4/03)
(hpgl)
-
TD-1034-214
Inner CF Rail Assembly
- Tony Jones (8/4/03)
(hpgl)
-
TD-1034-220
Insert Assembly
- Tony Jones (8/4/03)
(hpgl)
End-Cap Thermal Enclosure
-
ATLISEE_0001 (TD-1012-001)
Thermal Enclosure
- Jason Tarrant (12/11/01)
(EDMS,
CDD,
hpgl)
-
ATLISEE_0002 (TD-1012-011)
Outer Thermal Enclosure Structure
- Jason Tarrant (12/11/01)
(EDMS,
CDD,
hpgl)
-
ATLISEE_0003 (TD-1012-060)
Rear Thermal Enclosure Structure
- Jason Tarrant (12/11/01)
(EDMS,
CDD,
hpgl)
-
ATLISEE_0004 (TD-1012-060)
Rear Thermal Enclosure Structure
- Jason Tarrant (12/11/01)
(EDMS,
CDD,
hpgl)
-
ATLISEE_0005 (TD-1012-180)
Outer Cooling Circuit
- Jason Tarrant (12/11/01)
(EDMS,
CDD,
hpgl)
-
ATLISEE_0006 (TD-1012-377)
Outer Thermal Enclosure Quadrant
- Jason Tarrant (12/11/01)
(EDMS,
CDD,
hpgl)
-
ATLISEE_0007 (TD-1012-377)
Outer Thermal Enclosure Quadrant
- Jason Tarrant (12/11/01)
(EDMS,
CDD,
hpgl)
-
ATLISEE_0008 (TD-1012-906)
Inner Thermal Enclosure
- Jason Tarrant (12/11/01)
(EDMS,
CDD,
hpgl)
-
ATLISEE_0009 (TD-1012-927)
In-fill Panel
- Jason Tarrant (12/11/01)
(EDMS,
CDD,
hpgl)
-
ATLISEE_0010 (TD-1012-937)
Services Feed-through
- Jason Tarrant (12/11/01)
(EDMS,
CDD,
hpgl)
Back to RAL SCT EC Engineering
Last updated: 12 May 03
Stephen Haywood S.Haywood@rl.ac.uk